In the MXML protocol you can set which type of analysis model should be used.
The code for the correct setting of the analysis model is given in the table below:
Type analysis model
| ID | Type analysis model |
| 1 | 3D-Frame |
| 2 | 2D-Frame |
| 3 | 2D-Grillage |
| 4 | 1D-Beam |
| 7 | 2D-Truss |
| 8 | 3D-Truss |
| 9 | FEM 2D-Plate |
| 10 | FEM 2D-Wall |
| 12 | 1D-Beam advanced |
| 13 | 2D-Frame advanced |
| 14 | 2D-Grillage advanced |
| 15 | 2D-Grillage/FEM 2D-Plate |