In the MXML protocol can be set which standards should be applied.
The code for the correct setting of the standard is given in the table below:
Code check settings
| Code | General | Loads | Concrete | Steel | Timber |
| EN | 2 | 3 | 4 | N/A | N/A |
| NEN-EN | 7 | 8 | 9 | N/A | N/A |
| NEN | 12 | 13 | 14 | N/A | N/A |
| NBN-EN | 18 | 19 | 20 | N/A | N/A |
| LST-EN | 68 | 62 | 71 | N/A | N/A |
| DIN-EN | 82 | 85 | N/A | N/A | N/A |