Calculating the balanced position for the water accumulation is a generative process. Therefore the assumptions are saved in Load calculation during the start of the calculation. Data of the load calculation should be studied carefully, in this way the assumptions are available at all times.
Single system:
1 field system:
End field with 3D-report (geometry):
End field with 3D-report (load case water accumulation):
End field with 3D-report (geometry, number of girders = 0):
End field with 3D-report (load case water accumulation):
Explanation of 3D-systems:
3D-system single field:
3D-system end field:
3D-system inner field:
Results in MatrixFrame® – 2D-Frame:
