2D-Plate specific items:
Placement of reinforcement (could be not symmetric on top and on bottom)
2D-Wall package specific items:
Reinforcement placement for 2D-Wall package is described as 1-Sided/2-Sided and could be applied using Reinforcement definition:
Where:
 |
 |
|
2-Sided symmetrically placed reinforcement |
1-Sided reinforcement |
|
|
Reinforcement – reinforcement definition as 2-Sided/1-Sided |
|
|
Required reinforcement - as “2-Sided”/”1-Sided” in the local X’-direction [mm2/m] |
|
|
Required reinforcement - as “2-Sided”/”1-Sided” in the local Y’-direction [mm2/m] |
