The tab "Reinforcement" is designed to provide reinforcement and to check whether it is enough to carry external forces. For columns elements two sided or all sided reinforcement can be chosen. Limit moment value and quantity of required reinforcement are also represented. The tooltips of Md values display bending moment calculation rules. The tooltips of Check data provide an additional information about capacity and detailing checks.
| Nr. |
Description of the member. Number of structural member |
| Reinf. sided |
Description of the prescribed reinforcement. Reinforcement position in the cross-section |
| L.C. |
All results are shown from indicated load combinations. Label of the load combination |
| Reinf./Stirrups (Transverse reinf.) |
Description of the prescribed reinforcement. Prescribed reinforcement/stirrups quantity and diameter |
| As;prov, As;req, As;tot |
Description of the provided/required/total reinforcement. Cross-section area of provided/required/total reinforcement [mm2] |
| N'd |
Internal member forces. Design axial force of the member from decisive load combination |
| Md |
Internal member forces. Acting design moment with or without second order effects |
| Mu |
Description of the member limit capacity. Limit capacity of the member with provided reinforcement |
| Check As |
Representation of analysis results. Check of the cross-section area of the reinforcement |
| Check Reinf. |
Representation of analysis results. Check of the reinforcement placement |