- ERROR. Initial data file Kws. 00 was not found.
(Analysis procedure is performed without initial data)
- ERROR. I/O error. Function: CLOSE. File Name
- ERROR. I/O error. Function: GET. File Name
- ERROR. I/O error. Function: OPEN/create/. File Name
- ERROR. I/O error. Function: PUT. File Name
- ERROR. I/O error. Function: SEEK. File Name
- ERROR. Selection error. Equation number. File Name. Dst
(Cannot create or use temporary file. Check, that there is enough free space in your hard disk or call Help Desk.)
- ERROR. 0 byte request was not satisfied.
(module name)
- ERROR. number byte of working memory required for document % 1d.
- ERROR. Insufficient main memory. Number byte request in module name was not satisfied.
(Not enough RAM space. Try to close other applications)
- ERROR. Document number is absent in non-linear computation
(not all data are filled for non-linear calculation)
- ERROR. Message name was not found
(PLEASE CALL HELP DESK)
- ERROR. Matrix decomposition error number. Node No number. Equation No number.
(Geometrically - variable system.)
- ERROR. Design error number.
(DOC1- error was found in member definition part;
DOC2- error was found in releases definition part;
DOC3- error was found in section properties, rigid links or elastic foundation definition part;
DOC4- error was found in node co-ordinate definition part;
DOC5- error was found in supports definition part;
DOC6- error was found in load type and direction definition part;
DOC7- error was found in load value and placement definition part.)
- ERROR. Fixed displacements are not realised for non-linear computation
- ERROR. Errors in initial data
- ERROR. TASK WAS NOT EXECUTED Time consumed: number min.
(Finally comment after abnormally ended task)