The Plate part is used to select additional elements of the Angular joint connection.
|
Parameter |
Unit |
Description |
|
Stiffener |
- |
Angular connection stiffeners:
 |
|
Section |
- |
List of available sections is dependent on commercial technical modules. Could be extended on request, or by updating a product table. It allows to select the shape and dimensions of the joint connection structure sections. The restrictions and the rules for the different sections are used for design reason |
|
Material |
- |
Steel material name is using for code check calculation and supported by EN 1993-1-1#Table 3.1 and related national annexes such as NEN-EN 1993-1-1#3.1. Items listed in a Material drop down list depend on chosen code or/and national annex |
|
Length |
mm |
Length of plate intended for Angular joint connection. If the length entered is a decimal fraction, the value will be rounded to the integer. The Length is shown in the following figure:
 |
|
ah |
mm |
 |
Proposal is used for determining the optimal logical values of parameters and measurements of the structure elements as well as the optimal arrangement of these elements from geometrical point of view (not based on UC's). Proposal offers the optimal allowed modification of the construction model by making any necessary changes to the data entered by the user.