Dividing method

Advanced analysis: Meshing properties dividing method

 

Automatic mesh

Mesh value is determined automatically

By means of distance

Dividing of all borders of  plate geometry objects, for the plate itself, support, elastic foundation, loads etc in elements with a minimum dimension [m]

By means of pieces

Dividing of all borders of plate geometry objects, for the plate itself, support, elastic foundation, loads etc in at least an x-number of pieces

 

The parameters that are mentioned can be changed automatically during the meshing process in order to realize meshing. For example if the parameter is set “per distance” on 1 m, but the distance between the plate geometry objects is 0.5 m, this parameter is automatically set again on 0.5 m or less.

 

Meshing method: Dence by means of pieces: 5

Meshing method: Dence

By means of pieces: 5

Meshing method: Dence by means of pieces: 10

Meshing method: Dence

By means of pieces: 10

Meshing method: Dence by means of pieces: 5

Meshing method: Dence

By means of pieces: 5

Meshing method: Dence by means of distance: 1

Meshing method: Dence

By means of distance: 1

Meshing method: Dence by means of distance: 0.5

Meshing method: Dence

By means of distance: 0.5

Meshing method: Dence by means of distance: 1

Meshing method: Dence

By means of distance: 1